Mechanical joint for light gauge stainless steel pipes for ordinary piping - One -Touch mechanical joint fitting
Product summary
Many mechanical joints for light gauge stainless steel pipes for ordinary piping (JIS G 3448) require joining with special tools or pipe processing.
The EG JOINT allows the joining of pipes by simple insertion into the joint that the installation was properly done.
Structure
The edge mounted in the holder bites into the pipe surface to ensure pipe retention. The edge is held inside the tapered portion of the joint and serves as a wedge to prevent the pipe from coming off.
Scope
*Not suitable for steam piping
*Please consult us on use for fluids other than listed above.
| Water composition | BENKAN's specified eater qualities level |
| Choloride ion | Under 25mg/L |
| Sulfate ion | Under 30mg/L |
| Hardness | Under 80 mg/L |
| Electrical conductivity | Under 250 μS/cm |
| Iron or Chemical compound | Under 0.05 mg/L |
| pH level | Over 7.0 |
Standards
EG JOINT comply with the standards of the Stainless Steel Association (SAS322) in Japan.
Certified as an OEM factory in Benkan.
Installation
è When the construction of EG JOINT is completed, if the water supply has not been provided, an inserted pipe can be removed by using a remover (removal jig dedicated to each pipe size) to push the holder at the end of the joint and release the edge from the pipe surface.
